How to Install House Numbers with Flawless Alignment

TABLE OF CONTENTS: What is Simple Snap™? Key Benefits of Simple Snap™ Bathroom Accessories Why Simple Snap™ Bathroom Hardware? Benefits for DIY Install Benefits for Pros (Contractors & Installers): Durability for Real Life Where You'll Find Simple Snap Frequently Asked Questions   Bathroom accessory installation hasn't changed in decades. And that's the problem. Set-screws, tiny tools, wall damage, and hardware that loosens over time have become the norm. Simple Snap™ by Delta® breaks that cycle. Introducing a new, easy way to install bathroom accessories: no drill, no fuss, no frustration. Simple Snap™ gives both DIYers and pros a better experience from start to finish. What is Simple Snap™? Simple Snap™ is a no-drill, click-in mounting system that replaces traditional set-screw installations for Delta® bathroom accessories. There are no special tools required; simply screw in the brackets and snap on your accessory.  Built with durable materials and corrosion-resistant finishes, bathroom accessories with Simple Snap™ installation provide a secure, long-lasting hold. Like all Delta® bath products, they are also backed by a lifetime limited warranty. Available on select Delta® collections for towel bars, rings, hooks, and toilet paper holders. Key Benefits of Simple Snap™ Bathroom Accessories The name says it all! Simple Snap™ is a straightforward mounting system for wall-mounted bathroom hardware and accessories, with a variety of benefits: A satisfying snap-on experience so you know your accessory is secure Slim hammer-in anchors – no drilling or pilot hole needed Snap-on bracket eliminates the need for routine re-tightening No special tools needed, like hex wrenches (i.e., Allen wrench) No fumbling with tiny set screws You only need a Phillips screwdriver and a hammer to install – everything else is included Screw(s) are fastened straight into the wall – no awkward or tedious turning of an Allen wrench, which can scratch walls The bracket is nylon, reinforced with metal for a durable, long-lasting hold Why Simple Snap™ Bathroom Hardware? For years, concealed screws meant one thing: a frustrating set-screw installation. It was a tedious process that risked scratched paint and yielded hardware that rarely stayed tight. Now, you can skip the Allen wrench. That's why our engineering team created Simple Snap™ bathroom hardware. It eliminates the frustration, wall damage, and ongoing maintenance that customers have wrestled with. With a simple click-in system, both pros and homeowners can have a smoother, faster install for bath hardware like towel bars or hooks. Benefits for DIY Install Easy setup: Fewer steps and no tricky screws mean a confident DIY installation, even on your first try. Cleaner walls, less risk: Slim metal anchors don't require any drilling, just tap them in with a hammer. If you remove or replace an accessory, the smaller anchor footprint makes patching and painting less intense than typical drywall anchors. No re-tightening: Once it snaps, it stays. Your accessory remains secure without regular adjustments. Benefits for Pros (Contractors & Installers): Smoother prep: No drilling or pilot holes means you can install and move on to your next job. Faster installation: A consistent, snap-to-secure mechanism speeds up your workflow. Reliable hold: Deliver polished results that look great the first time and stay secure. Durability for Real Life In a high-touch space like the bathroom, quality isn't optional; it's essential. That's why Simple Snap™ bathroom sets and accessories are engineered to the same rigorous standards as all Delta® bathroom hardware products. All our finishes – from brushed nickel to the soft gold of champagne bronze – resist corrosion, tarnish, and discoloration. Towel bars and other bath accessories are made with zinc or a combination of zinc and steel. Built for a secure hold, the Simple Snap™ bracket features a resilient nylon body reinforced by a central metal plate. This combination of materials ensures long-term durability and stability for bathroom hardware. Where You'll Find Simple Snap Simple Snap™ is available on select Delta® bathroom hardware collections, including popular accessories like towel hooks and bars. Frequently Asked Questions Q: Do I need special tools to install Simple Snap™? A: No specialty tools are required. A pencil, a small hammer, and a Phillips head screwdriver are all you need. Q: Will I need to re-tighten the screws later? A: No. The click-to-lock design maintains a firm hold without routine re-tightening. Q: What if I remodel or move an accessory? A: Simply un-click the accessory to remove it. Q: Which products include Simple Snap™? A: Select Delta® bathroom sets and accessories, including towel bars, toilet paper holders, and hooks. Availability varies by collection and finish. Experience the difference for yourself. Upgrade to Simple Snap™: a faster, easier way to install bathroom accessories.

Quick Overview to Install a Towel Rack  Tools and Materials You’ll Need  Choosing the Right Placement for a Towel RackRecommended Height for Towel RacksHow to Install a Towel Rack (Step-by-Step) How to Remove a Towel Rack from the WallFrequently Asked Questions How to Install a Towel Rack from Start to Finish    Please note: This guide is for general informational purposes only. Always follow manufacturer instructions and local building codes. If unsure, consult a qualified professional. Installing a towel rack involves measuring and marking placement for the screws, securing mounting brackets into wall studs or drywall anchors, and attaching the bar. Most installations can be completed in under 30 minutes with basic tools. Many towel racks use a set-screw mounting system that keeps hardware out of sight and the design streamlined. Once you understand how this common bracket works, installing a towel rack becomes a quick DIY project. Tools and Materials You’ll Need To install a towel rack, you’ll need a few basic tools and materials.  Required: Towel rack and included hardware Stud finder Level Measuring tape Drill and drill bits (if installing into studs) Screwdriver Drywall anchors (if needed) Pencil Nice to have: Paper mounting template (this makes it easy to level and mark where the brackets will be fastened) Note: All Delta® and Franklin Brass® branded towel bars come with a paper mounting template for your convenience.  Choosing the Right Placement for a Towel Rack Finding the perfect spot for your towel rack is about balancing style with everyday practicality. While you should always tailor your home to the people who live in it, these expert tips will help guide you.  Recommended Height for Towel Racks Most pros install racks at 48 inches, but don’t be afraid to break the rules for comfort. Whether it’s lower for children or higher for extra-long towels, your goal is a space that supports your daily routine.  Let them breathe: Ensure there is enough "breathable" space for towels to dry without touching the floor or baseboards or covering electrical outlets. Hand towel racks: For hand towel holders, think about what feels instinctual. You could place your rack where your hands naturally want to reach after you wash them. Proper placement reduces water drips on surfaces, protecting your floors and cabinets over time. PRO TIP: Measure twice, drill once! While towel bars are simple to uninstall, you don’t want to have to patch and repaint your wall. Take care when measuring and leveling your towel bar during installation.  Spacing and Wall Considerations Where to hang towels in bathroom: While there are no set standards for towel bar placement, it is advised to avoid locations where a hanging towel will touch another object below. For example, if you put a towel bar over a vanity, you want it high enough that the hand towel is not resting on the vanity itself. You also don’t want a hanging towel to touch the toilet or bath edge – remember the idea is to keep them dry!   Clearance considerations: Most towel racks stick out between 2.5 to 3 inches away from the wall, so keep this in mind if installing behind a door. The door should swing freely without hitting the towel rack, as this may cause damage to the door or rack. Projection (the space between the towel bar and wall) can typically be found on product pages on a retailer’s website. Projection can also be referred to as “depth” (D) in the product's specifications.   Most Delta® and Franklin Brass® branded towel racks will have a dimension image, so you can assess how the bathroom accessory will fit in your space. How to Install a Towel Rack (Step-by-Step) Installing a towel rack is a straightforward project when you break it down into a clear sequence of steps. With a bit of preparation, you can move through the installation confidently and end up with a secure, aligned towel holder. Here’s how to get that professional look with ease:  Step 1 – Measure and Mark Use a level and pencil (and template, if your towel rack includes one)  Mark bracket locations, usually 48 inches from the floor, but can be based on the user’s height Step 2 – Locate Studs (If Available) Use a stud finder Adjust marks for bracket placement if studs are available PRO TIP: Try to screw at least one bracket into a stud. With longer towel bars, 24 inches and above, it’s possible to fasten both brackets into a stud. Typically, wall studs are 16 inches apart. Rooms and home designs will vary, so always use a stud finder to confirm the stud placement. Step 3 – Drill Pilot Holes If installing into solid wood or into a wooden stud: Drill 1/16” holes, being sure to keep the drill level. If installing into ceramic or sheetrock without a wooden stud: Drill 3/16” holes, keeping drill level. Step 4 – Install Anchors (If Needed) If both towel bar brackets aren’t attached to wood studs, anchors will be needed to provide a secure hold. Delta® and Franklin Brass® branded towel racks include mounting hardware designed for common wall types. Here are a few tips for a smooth installation: Flush fit: Insert anchors into pilot holes and gently tap them in with a hammer. Make sure the anchor is as flush (flat) as possible against the installation surface. This will help prevent the bracket from wobbling. Be gentle: Take care to tap gently and accurately to not mark up the wall or break ceramic tiles.  Step 5 – Mount Brackets Secure evenly: Secure towel bar brackets to the wall with fasteners (screws) by screwing them through the pilot hole and either into a wooden stud or into your ceramic or drywall anchor. Be sure the clips face outward (east-west).  Avoid overtightening. Overtightening can cause the anchor to "strip" or chew through the drywall, weakening the hole and causing the towel rack to sag later.  Pro Tip: Know when to stop. Turn the screw until you feel firm resistance and the bracket no longer moves. This is the ideal tightness.  Re-check level: Place your level over the top of both brackets and confirm they are level.  Step 6 – Attach the Towel Bar Prep the posts: Use the included hex (Allen) wrench to slightly loosen the small set screws at the bottom of the posts. This ensures they slip easily over the wall brackets. Assemble the bar: Slide the bar into the two posts. Hook and align: Slide the assembled towel bar over the brackets. Make sure the posts "hook" onto the top of the brackets with the set screws facing the floor. Lock it in place: Push the posts flush against the wall and tighten the set screws so the towel bar feels sturdy and secure. How to Remove a Towel Rack from the Wall Removing a towel rack is straightforward, whether it’s for fixing, relocating, or replacement. Here are the four steps to completely remove a towel rack from the wall: Loosen set screws with a hex (Allen) wrench. Remove bar and brackets. Unscrew mounts (aka brackets) and remove any anchors (if present). If you’re changing the location of your towel rack, you’ll need to fill the old drywall holes and touch up the paint. If you prefer help with the repair, a qualified professional can do it for you. A Small Upgrade That Makes a Big Difference Delta® and Franklin Brass® towel bars include mounting hardware for typical wall types and clear, DIY‑friendly instructions for a smooth install. Our bathroom hardware is designed for everyday use, featuring durable finishes that resist moisture and corrosion to stand the test of time. With designs that coordinate with Liberty® cabinet hardware and Delta® faucets and bath accessories, you can find everything you need across our brands to create a cohesive, easy‑to‑pull‑together look. At the end of the day, you aren’t just installing hardware. You’re completing the look of your home with confidence. Explore Towel Racks  Frequently Asked Questions Q: How Are Towel Racks Attached to a Wall? A: Towel racks can be attached to the wall in three main ways: Attaching directly to a wooden wall stud Using special anchors to attach to drywall surfaces Attaching the rack to drywall with toggle bolts for extra support The surface being installed on and the location of wall studs will dictate which installation method you use. It’s important to always follow the manufacturer's instructions included with your particular towel rack.  Stud Mounting Attaching a towel rack to the wall using a wall stud is the most secure and stable installation method. We recommend installing at least one of the towel rack posts into a stud (standard wall stud spacing in homes is 16”, making it difficult to install an 18 or 24” towel bar into both studs). A stud can be easily located using a stud finder. Pro Tip: Delta® and Franklin Brass® towel racks conveniently include mounting hardware designed for common wall types. However, if you’re installing one post into a stud, you don’t need to use the anchors provided. Simply follow the instructions you received with your product for a stud installation.  Drywall Installation If a wall stud isn’t available, you’ll need to use drywall anchors. Drywall is too crumbly for a standard screw to hold weight on its own. The anchor provides the necessary reinforcement to prevent the rack from pulling out of the wall.  Please note: Drywall anchors are specifically for drywall and don't work properly on tile, wood, or masonry surfaces. Wood will not require any anchors; it can be treated like installing into wall studs. For tile or masonry, refer to your specific product instructions. Using Toggle Bolts These are a type of anchor that essentially acts like a clamp between the front and back of the drywall. Toggle bolts will provide more stability and “grab” than typical drywall anchors. A toggle bolt is commonly used to install a grab bar, but can also be used in other instances: If drywall anchors are not providing sufficient grip in the drywall If the drilled holes are too big for other anchors (Note: Be sure to read manufacturer instructions carefully to drill the right-sized pilot hole for the anchors included with your product) Frequently Asked Questions Q: Are there any alternatives to set-screw mounting? A: Yes. The most common alternatives to set-screw mounting systems are adhesive towel bars, exposed screw, and Simple Snap – exclusively from Delta®.  Adhesive towel bars can be attractive to renters and those who want a no-drill towel bar, but they lack the same durability or stability as options that attach the towel bar brackets with screws.  With exposed screw towel bar installation, you get a more raw aesthetic that appeals to those who have industrial or farmhouse decor styles. Those who want a modern, sleek look will often choose the concealed hardware of set-screw towel racks. If you want the clean concealed hardware look but without the tedious tools and steps of a set-screw, Simple Snap is your solution. It’s an innovative bathroom accessory installation system now available from Delta® on select collections.  Q: How do I tighten a loose set-screw on a towel rack? A: Simply use the allen/hex wrench that was included with your product, or one with a size that fits the set-screw. Rotate the screw until fully tightened. Tightening set-screws can often fix the issue of a wobbly towel bar.   

TABLE OF CONTENTS: What is an Adjustable Drawer Pull? Why Use an Adjustable Drawer or Cabinet Pull? Transform with Adjusta-Pull™ Cabinet Pulls How to Choose the Right Size Style and Finish Options How to Adjust Drawer Pull Size Adjusting Channel Designs Adjusting Bar Designs Adjustable Pull vs Dual Mount Where to Buy Adjustable Drawer Pulls Final Thoughts Are you struggling to find a non-standard-sized drawer or cabinet pull? Or do you want to replace cabinet hardware on multiple doors and drawers in your home, but don’t want to hassle with measuring all the center hole distances? Adjustable drawer pulls are the Swiss army knife of cabinet hardware: they can fit a range of center-to-center sizes, all in one handle. What is an Adjustable Drawer Pull? An adjustable drawer pull or adjustable cabinet pull is a handle able to fit various center-to-center sizes. It’s like having 5 sizes in one pull! Here are some examples of adjustable drawer pull length ranges: 1 to 4 inches (25 mm to 102 mm) 1-3/8 to 6-5/16 inches (35 mm to 160 mm) 2 to 8-13/16-inches (51 mm to 224 mm) Older cabinets, dressers, or drawers can sometimes have hard-to-find pull sizes, like 2.5-inch pulls, or 4-inch pulls. This is where adjustable pulls can be a time saver. Why Use an Adjustable Drawer or Cabinet Pull? Adjustable handles solve multiple DIY problems like: Replacing pulls with non-standard, unique center-to-centers Covering up old drill holes, scratches, or imperfections on doors or drawers One-stop shop for replacing multiple center-to-center length pulls across the home Upgrading to longer, more modern pulls, but without patching and drilling new holes     No matter the name, adjustable drawer pulls and adjustable cabinet pulls work the same. They all can adapt to fit various centers, change length, and be used anywhere from the kitchen cabinets to dresser drawers. Easy to Fit. Designed to Impress. Transform with Adjusta-Pull™ Cabinet Pulls Adjusta-Pull™ cabinet pulls are the original adjustable drawer and cabinet pull, designed and manufactured by Liberty Hardware. It is sold under both the Liberty® and Franklin Brass® brands. It’s a simple, stylish solution that gives you the look you want using the holes you already have. How to Choose the Right Size Adjusta-Pull™ cabinet pulls have various sizes (hole center ranges) to fit nearly every non-standard center-to-center length. If your drill hole length is near the end range of the adjustable cabinet pull, consider choosing the next size up.  For example, a 2.5-inch center-to-center will fit an adjustable drawer pull that is 2 to 8-13/16 inches. However, if you use the Adjusta-Pull™ bar pull design, the posts may be too close together for a balanced look. In this case, we recommend getting the 1-3/8 to 6-5/16 range. For an Adjusta-Pull™ channel post design, this won't matter. You can choose the shorter or longer pull that fits your style.   For an Adjusta-Pull™ channel post design, this won't matter. You can choose the shorter or longer pull that fits your style.   Style and Finish Options Using an adjustable cabinet pull doesn’t mean sacrificing style. Adjusta-Pull™ cabinet pulls have two different styles with functional and aesthetic benefits.  Adjusta-Pull™ handles are available in both modern and classic finishes like matte black, champagne bronze, brushed nickel, and gold.  How to Adjust Drawer Pull Size There are two ways to fit Adjusta-Pull™ adjustable drawer pulls and handles, depending on the style. Adjusting Channel Designs For the channel-style adjustable pull: Just place the posts over the existing holes, slide in the bar, and tighten for a perfect fit. It’s a damage-free solution that gets the job done in seconds. Adjusting Bar Designs Our bar pull style adjustable pull adjusts a little differently. You’ll mount the posts to cover the existing holes, slide the bar into the posts, tighten, and you're done!  Adjustable Pull vs Dual Mount Dual mount pulls only have two options for center to center, such as 4 inches or 5-1/16 inches. Unlike adjustable pulls, there is no micro-adjusting the length. You can only install on the two center hole lengths. Cup pulls are a popular pull style for dual mount hardware because they have the added benefit of covering old drill holes, scratches, or chipping that is close to the installation holes. Dual mount pulls offer good options for specific cabinet hardware updates and decor styles. However, they don’t offer the same range of adjustability, and style options are limited.  Where to Buy Adjustable Drawer Pulls Adjusta-Pull™ adjustable drawer pulls can be found online at Home Depot or Amazon. From classic styles to sleek and modern pulls, they offer you a no-drill solution to refresh your space in a flash. Final Thoughts Upgrading your cabinetry doesn’t mean a weekend full of dabbing on wood putty and getting out the power tools anymore. Whether you’re trying to hide old hardware scars, switch to bold modern pulls without drilling new holes, or struggling with non-standard measurements, Adjusta-Pull™ offers a seamless solution that fits your existing layout. Ready to transform your kitchen in minutes? Browse your favorite retailer for your Adjusta-Pull™ style. Shop Amazon Shop The Home Depot