Once you've purchased your new hardware you are ready to install:

• Remove the original hardware by loosening the screws
• Measure the space between holes carefully.
• Select the right drill bit size for the screws you are using.
• Make sure that the drilled holes are perfectly perpendicular to the drilling surface so that the pulls will be secured properly.
• To make it even easier and faster, use a Liberty Hardware Cabinet Hardware Installation Template (Model # AN0201C-G-Q1) to help you measure and mark the correct center-to-center holes for your hardware for pulls up to four inches.
• Drill new holes if your new knobs or pulls don't fit the old holes exactly.
• Screw the new hardware in place, one piece at a time.
• Check each piece for proper alignment. You can tighten the screws more or less to help adjust each piece into the best position.
• Enjoy your newly updated cabinets!